Dajana Test 3in1

.

Detailed instructions for use

1. Remove the test strip from the airtight container.
2. Dip the strip into the test water so that all zones are wet for 1-2 seconds.
3. Determine the KH and GH value: after removing the stripe from the water, place it immediately to the color scale on the back
side of the box and subtract the value by matching the corresponding colored zone to the strip with the color on the scale.
4. Determine the pH value: after stripping the strip from the water, place it after 1 minute on the color scale on the back
side of the box and subtract the value by comparing the colored pH zone with the color on the scale.

General recommendations:
Keep the test strips in a dry place.
Keep test strips in the original package.
Do not reach the box with strips with wet hands.

Alkalinity and total hardness are listed in German hardness grades (KH, GH) in the table. For conversion
to ppm units the values in German degrees are multiplied by a factor of 17.8.
In case of ambiguity, please visit the on-line consultancy at: www.dajanapet.cz